Rugged Computers
MRC-7002
MMRC-106
MRC-108S
MRC-106*137
RAC-100
MRC-105
MRC-106
MRC-150
MRC-120
MRC-104
MRC-104C
MRC-104S
MRC-7000A
MRCD-106
Rugged Disks
Rugged Printers
Rugged Displays
Rugged Portable
Terminal
Rugged Digital
Communications
MRCD-106
 
FEATURES


MRCD 106 Data Sheet
* CPU -Intel® Pentium® 4 processor with Hyper Threading Technology, 2.0GHz ~ 3.2GHz+
* Front Side Bus - 800MHz/533MHz/400MHz
* Chipset - Intel® 875P chipset
* L2 Cache - 256K/512K, CPU integrated
* BIOS - Award BIOS, ACPI supported
System Memory Two sockets supports up to 2GB DDR266/333/400 * memory Supports dual channel, ECC function
Micro AGP VGA - ATI Mobility M10 VGA, AGP8X, 64MB frame buffer * (DDR) via IBA110-64A, supports CRT, LVDS, TV-out, 2nd CRT
Primary LAN - Intel® 82551QM 10/100Mb Ethernet controller
* Secondary LAN (optional) - Intel® 82547GI Gigabit Ethernet controller.
* Audio - ICH5R integrated audio with AC97 codec, ALC650
* Supports 5.1 channel
* LPC I/O - Winbond 83627HF LPC I/O supports IrDA, LPT, Com1 (RS232), COM2 (RS232/422/485), FDC and hardware monitoring.
* IDE Interface - ICH5R built-in IDE1, IDE2 (Ultra DMA 33//66/100).
* FDD Interface - Supports up to two floppy disk drives: 3.5" and/or 5.25" drives; 3 Mode support
* Parallel Port - One parallel port supports SPP/EPP/ECP.
* Serial Ports –
* One RS-232/422/485 and one RS-232 port
* Serial ATA - Two SATA ports, support RAID0 or RAID1
* Watchdog Timer - Generates system reset; 256 levels
Solid State Disk Interface – (Optional) DiskOnChip socket, * supports up to 288MB
Hardware Monitoring - Built in W83627HF; monitors system/CPU * temperature and voltage status
USB - Supports 4 USB ports, USB 2.0 compliant
 
OPTIONS
  40 or 60 GByte Removable Disk
MIL-STD-1553 Interface
ARINC 429 Interface
IEEE 488 Interface
IEEE
Small Computer System Interface (SCSI)
PCMCIA Interface and Cradle.
FLASH Memory.
115/230 VAC 47-440 Hz Power.
 
DESCRIPTION
  MILPER's MRCD-106 is a high performance, one-piece ruggedized computer/Workstation designed specifically for military tactical field and strategic applications. The system is based on a passive backplane with Single Board Computer. And 19" LCD Display. It is constructed in an environmentally resistant package. The MRCD-106 is ideally suited for sheltered, Airborne or Naval applications.
 
PERIPHERALS
  * CD-ROM – Low Profile CD-DVD
* Hard Disk – 60 GB Internal Fix.
* Additional Interfaces slots Four Slots, accept PCI printed circuit modules that are available for all PC compatible computers.
 
MONITOR
 

LCD Panel
Effective Display - 19” / 48.2. cm diagonal
Horizontal Pitch - 0.255x0.255 mm
LCD Panel Type - TFT Active Matrix, 1280x (R.G.B.) x 1024 R.G.B. vertical stripe Non glare hard coated

Video dot rate - 135 MHz.

Optical Characteristics @ 25 oC
Contrast ratio 500:1 typical
Brightness 250 nits (typ.)
Viewing angle at contrast ratio > 5:1 Up 85o | down 85o | left 85o | right 85o

Resolution and preset modes Maximum resolution 1280
factory preset modes
Resolution H. freq. Refrash Rate
720*400 31.469 70.000
640*480 31.469 60.000
640*480 37.861 72.000
640*480 37.500 75.000
800*600 37.879 60.000
800*600 48.077 72.000
800*600 46.875 75.000
1024*768 48.363 60.000
1024*768 56.746 70.000
1024*768 60.023 75.000
1280*1024 63.981 60.000
1280*1024 79.976 75.000
1152*864 67.500 75.000

 
   
 
ENVIRONMENTAL CHARACTERISTICS
 

Temperature
Operating: -18 - +55 oC
Intermittent: -20 - +65 oC
Non Operating: -30 - +71 oC

Humidity
Operating/Storage MIL-STD-810C, Method 507.1 Proc. I, 95% RH
(non condensation)

Vibrations
Hard Mount: MIL-STD-810D, Method 514.3, Category 4, Table 514.3-II & Fig. 514.3-25A
Shock Tray Mount: MIL-STD-810D, Method 514.3, Category 6.

Shock
Operating: MIL-STD-810D, Method 516.4, Proc. I, -15g 11ms. Saw Tooth

Explosive :MIL-5400, Par. 3.2.2.4.10

EMI/RFI : MIL-STD-461, Class 3

DRIP PROOF: MIL-STD-810E

Drip Proof : MIL-STD-810E, 95% RH (Non Condensing)

ALTITUDE:Operating: 15,000 ft. Non Operating: 40,000 ft.

 
PYSICAL CHARACTERISTICS
  SIZE 10U H x 19” W x 6” D
WEIGHT 15 Kg.
POWER 20 - 30 VDC, 230VAC 50/60Hz Optional.
   
  

adress mail sales@milper.com
Home | About Us | Products | Presentation | News | Cutomers | Contact Us