Low Power Supports Intel® Core 2 Duo, Core Duo, Core Solo family processors with 533/667 MHz Intel® Embedded Processor List Microprocessor up to 1.4 GHz.
Memory up to 4 Gbyte un-buffered non-ECC DDR2 533/667 SDRAM.
Expandable Construction. PCI User defined Interface.
Memory up to 512 Mbyte SDRAM/VCM
Expandable Construction. PCI User defined Interface.
Support Compact Flash Type II
Complete Array of Rugged Peripherals
Shock & Vibrations enhancement Kits Available.
DESCRIPTION
MILPER’s MRC-7002 is a high performance rugged computer designed specifically for Airborne, Naval and Military Tactical field applications.
MRC-7002 Standard Interfaces:
LAN - 2 x Intel® 82573L PCI Express Gigabit Ethernet
Supports Boot From LAN (PXE)
Display
Intel® 945GM chipset with integrated graphics controller, up to 64 MB of dynamic video memory allocation.
• Analog VGA interface:
Resolution up to 1400X1050,
• LVDS interface: (Internal),
Single (18bit) or dual pixel (36bit) LVDS panel
• CCFL interface :
1 x CCFL for LCD Panel Backlight Inverter Power Pin 2,3 support 12VDC power source for inverter (Max. 12VDC@2A for each)
Audio - Realtek RTL655 CODEC for AC97 v2.1 CODECl, Interface: Mic in and Speaker out
Expansion:
1 x PCI Express slot
1 x PCIe x16 slot
1 x PCI slot
I/O Interface:
USB 2.0: 2 ports connector on front
USB 2.0: 4 ports, with 1x6 JST (2.5 mm )
Serial ports: 4 x SIO, support RS-232 only 1 x jumper to switch 5V and 12V power source
Parallel port: 1 port, with 2x13 box-header (2.0 mm)
Keyboard/Mouse
GPIO: Support 4 sets of general purpose I/O each with TTL level (5V) interface
Storage:
CF: 1x Internal CompactFlash socket Supports One Type I& II Compact Flash Card (Primary Master)
SATA: 2 x SATA ports, bandwidth: 150 MB/s
IDE: 1 x 44-pin IDE connector
DOM: 1 x 2-pin Jst power (+5V, GND ) for DOM
System Monitor:
5 voltage (For +3.3V, +5V, +12V, Vcore and +2.5V)
3 Temperatures (CPU, two external Temperature Sensor)
3 FANs speed (CPU and System FANs)
Watchdog Timer:
Watchdog Timer is programmable by software from 1 to 255 seconds (Tolerance 10% under room temperature 25°C)
On-board RTC
On-chip RTC with battery back up RTC Tolerance less than 2sec (24 hours) under 25?C environment
The modular construction of the MRC-7000-2 allows for the attachment of a range of peripherals, accessories, and interfaces.
120GB Internal Fix Hard Disk is a standard option.
The MRC-7002 can run MS-DOS, UNIX, QNX, WINDOWS or any other operating system designed for the PC.
The standard MRC-7002 operates from 20 - 30 VDC power source. With dimensions of only 5.87” High x 8.45” Wide x 12” Deep, the MRC-7000A is ideally suited for embedded applications requiring to survive tough environments.
OPTIONS
• Up to 16 Gbyte Flash Disk
• Up to 120 GB Hard Disk
• MIL-STD-1553 Interface
• ARINC 429 Interface
• Customer Defined.
• Additional Serial Ports
• Customer’s Interface
• More – Consult Factory
MRC-7002
sales@milper.com